Category Archives: RC Stuff

Articles related to RC cars, boats, and quadcopter.

3D Printing the OpenRC F1 Car & Sourcing Parts

If you’re looking to build Daniel Noree’s OpenRC F1 car, then this is the place to help you get started. In this series of posts I plan to document my experience 3D printing, sourcing parts and the assembly of the F1 RC car. NOTE: This post is subject to change as I collect all of […]

How to Set Up Flytrex Core 2 with DJI Naza-M v2

I recently purchased a Flytrex Core 2 for my F450 and documented the installation process and experience. I thought it would be helpful for others to share what I learned so that when you set up your Flytrex Core 2 it will be a much better experience. Overall I found that the Core 2 installation […]

How to Connect Walkera G-3D Gimbal to Naza-M V2 Controller

I recently purchased the Walkera G-3D 3 Axis gimbal for my DJI F450 (Naza-M V2) to find out that there really isn’t any documentation covering this particular setup. So, i headed over to the forums to see if anyone else was running into the same issue, thankfully I found others. Unfortunately online directions are not as clear as a […]

DJI F450 Project – Parts Sourcing & Build

After mastering the Dromida Ominus and growing tired of the lack of thrust, I set out to build my own quad. After weeks of research I narrowed my choice down to the Flamewheel, aka F450 kit by DJI. Below you will find a listing of the parts and tools needed to put this quad together. You […]